Laser-induced breakdown spectroscopy (LIBS) and laser ablation (LA) inductively coupled plasma (ICP) mass spectrometry (MS) were utilized for microspatial analyses of a prehistoric bear (Ursus arctos) tooth dentine. The distribution of selected trace elements (Sr, Ba, Fe) was measured on a 26 mm×15 mm26 mm×15 mm large and 3 mm3 mm thick transverse cross section of a canine tooth. The Na and Mg content together with the distribution of matrix elements (Ca, P) was also monitored within this area. The depth of the LIBS craters was measured with an optical profilometer. As shown, both LIBS and LA-ICP-MS can be successfully used for the fast, spatially resolved analysis of prehistoric teeth samples. In addition to micro chemical analysis, the sample hardness was calculated using LIBS plasma ionic-to-atomic line intensity ratios of Mg (or Ca). To validate the sample hardness calculations, the hardness was also measured with a Vickers microhardness tester.

The development of a remote laser-induced breakdown spectroscopy (LIBS) setup with an off-axis Newtonian collection optics, Galilean-based focusing telescope, and a 532 nm532 nm flattop laser beam source is presented. The device was tested at a 6 m6 m distance on a slice of bone to simulate its possible use in the field, e.g., during archaeological excavations. It is shown that this setup is sufficiently sensitive to both major (P, Mg) and minor elements (Na, Zn, Sr). The measured quantities of Mg, Zn, and Sr correspond to the values obtained by reference laser ablation–inductively coupled plasma–mass spectrometry (LA-ICP-MS) measurements within an approximately 20% range of uncertainty. A single point calibration was performed by use of a bone meal standard . The radial element distribution is almost invariable by use of LA-ICP-MS, whereas the LIBS measurement showed a strong dependence on the sample porosity. Based on these results, this remote LIBS setup with a relatively large (350 mm350 mm) collecting mirror is capable of semiquantitative analysis at the level of units of mg kg-1.

Laser Induced Breakdown Spectroscopy (LIBS); Picea abie; heavy metals;

This work is focused on application of LIBS technique for the study of plant samples. The elemental mapping on cross section throughout the annual terminal twigs of Picea abies was performed using double pulse Laser Induced Breakdown Spectroscopy (DP LIBS). 2D maps were created, where distribution of Cu and Ca in the plant tissue was observed. After mineralization of twig parts originated in the vicinity of the implementation of cross section, ICP-MS analysis was used for determination of total content of investigated elements.

Bio-mineral structures, i.e., bones, teeth or kidney stones have been found to be excellent ""archives"" related to nutrition, living habits and exposure to changing environmental conditions. More specifically, formation of urolithic concrements (uroliths) represents specific biomineralization of living organism. Line scans of the concrement cross sections may provide information about the accumulation history of the elements of interest. Analytical Methods which can map the presence of different elements are e.g. Laser Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). Both of these methods have proven to be suitable for mapping the matrix elements, so further work is concerned with their use for the mapping of trace elements.