Laser-induced breakdown spectroscopy (LIBS) was used for the quantitative analysis of elements present in textile dyes at ambient pressure via the fundamental mode (1064 nm) of a Nd:YAG pulsed laser. Three samples were collected for this purpose. Spectra of textile dyes were acquired using an HR spectrometer (LIBS2000+, Ocean Optics, Inc.) having an optical resolution of 0.06 nm in the spectral range of 200 to 720 nm. Toxic metals like Cr, Cu, Fe, Ni, and Zn along with other elements like Al, Mg, Ca, and Na were revealed to exist in the samples. The %-age concentrations of the detected elements were measured by means of standard calibration curve method, intensities of every emission from every species, and calibration-free (CF) LIBS approach. Only Sample 3 was found to contain heavy metals like Cr, Cu, and Ni above the prescribed limit. The results using LIBS were found to be in good agreement when compared to outcomes of inductively coupled plasma/atomic emission spectroscopy (ICP/AES).

QUANTITATIVE-ANALYSIS; SAMPLES; LIBS; ABLATION; PLASMAS; ALLOYS; LEAD

Laser-induced breakdown spectroscopy (LIBS) was used for the quantitative analysis of elements present in textile dyes at ambient pressure via the fundamental mode (1064 nm) of a Nd:YAG pulsed laser. Three samples were collected for this purpose. Spectra of textile dyes were acquired using an HR spectrometer (LIBS2000+, Ocean Optics, Inc.) having an optical resolution of 0.06 nm in the spectral range of 200 to 720 nm. Toxic metals like Cr, Cu, Fe, Ni, and Zn along with other elements like Al, Mg, Ca, and Na were revealed to exist in the samples. The %-age concentrations of the detected elements were measured by means of standard calibration curve method, intensities of every emission from every species, and calibration-free (CF) LIBS approach. Only Sample 3 was found to contain heavy metals like Cr, Cu, and Ni above the prescribed limit. The results using LIBS were found to be in good agreement when compared to outcomes of inductively coupled plasma/atomic emission spectroscopy (ICP/AES).

AEROSOLS; MODEL

A spectrometer based on pulsed nanosecond laser-induced breakdown spectroscopy (LIBS) was employed for the quantitative determination of heavy and essential metals in salts from various sources available in Pakistan. Six salt samples were collected from sea salt and rock salt. Toxic metals (Cu, Cd, and Ni) and other microessentials (Fe, Ca, Co, Mg, Mn, S, and Zn) were investigated from the recorded spectra. The detection system was calibrated using a parametric dependence study. The quantitative analyses were accomplished under the assumption of local thermodynamic equilibrium and optically thin plasma. The results by the LIBS technique were in agreement with the outcomes of the same samples studied using a more standard approach like inductively coupled plasma-atomic emission spectroscopy (ICP-AES). When the concentrations of heavy and essential metals were calculated using a calibration-free LIBS method that does not need a standard salt specimen and dilution, both LIBS and ICP-AES were also in good agreement. The limit of detection of the experimental set up was determined for the observed heavy metals in the studied samples. (c) 2018 Optical Society of America