LIBS; Water; Hydrogen; ChemCam; Mars; Low pressure; Roughness;CHEMCAM INSTRUMENT SUITE; QUANTITATIVE-ANALYSIS; INDUCED DESORPTION; SOLID-SURFACES; INDUCED PLASMA; LOW-PRESSURES; GALE CRATER; MARS; CONFINEMENT; IMPROVEMENT

On Mars, Laser-Induced Breakdown Spectroscopy CUBS) as performed by the ChemCam instrument can be used to measure the hydrogen content of targets in situ, under a low pressure CO2 atmosphere. However, unexpected variations observed in the Martian dataset suggest an effect related to target roughness. Here, we present a series of laboratory experiments that reproduce the effect observed on Mars and explore possible causes. We show that the hydrogen peak intensity increases significantly with increasing exposure of the target surface to the LIBS plasma, and that these variations are specific to hydrogen, as other emission lines in the spectra are not affected. The increase of the signal could be related to an addition of hydrogen to the plasma due to interaction with the surrounding target surface, yet the exact physical process to explain such effect remains to be identified. More generally, this effect should be taken into account for the quantification of hydrogen in any LIBS applications where the roughness of the target is significant. (C) 2017 Elsevier B.V. All rights reserved.

LIBS spectroscopy; carbon; chlorine; sulfur; salts; Mars Science Laboratory;INDUCED BREAKDOWN SPECTROSCOPY; GALE CRATER; INSTRUMENT SUITE; MARS; MINERALOGY; CHEMISTRY; FEATURES; VEINS; ROCK; UNIT

Ancient environmental conditions on Mars can be probed through the identification of minerals on its surface, including water-deposited salts and cements dispersed in the pore space of sedimentary rocks. Laser-induced breakdown spectroscopy (LIBS) analyses by the Martian rover Curiosity's ChemCam instrument can indicate salts, and ChemCam surveys aid in identifying and selecting sites for further, detailed in situ analyses. We performed laboratory LIBS experiments under simulated Mars conditions with a ChemCam-like instrument on a series of mixtures containing increasing concentrations of salt in a basaltic background to investigate the potential for identifying and quantifying chloride, carbonate, and sulfate salts found only in small amounts, dispersed in bulk rock with ChemCam, rather than concentrated in veins. Data indicate that the presence of emission lines from the basalt matrix limited the number of Cl, C, and S emission lines found to be useful for quantitative analysis; nevertheless, several lines with intensities sensitive to salt concentration were identified. Detection limits for the elements based on individual emission lines ranged from similar to 20wt % carbonate (2wt % C), similar to 5-30wt % sulfate (1-8wt % S), and similar to 5-10wt % chloride (3-6wt % Cl) depending on the basaltic matrix and/or salt cation. Absolute quantification of Cl, C, and S in the samples via univariate analysis depends on the cation-anion pairing in the salt but appears relatively independent of matrices tested, following normalization. These results are promising for tracking relative changes in the salt content of bulk rock on the Martian surface with ChemCam.

laser-induced breakdown spectroscopy; ChemCam; Mars Science Laboratory; trace elements; weathering; magmatic differentiation;INDUCED BREAKDOWN SPECTROSCOPY; MARTIAN SOIL COMPONENT; NORTHWEST AFRICA 7034; IN-SITU; INSTRUMENT SUITE; METEORITE; LITHIUM; MINERALOGY; TARGETS; WATER

The Chemistry Camera (ChemCam) instrument onboard Curiosity can detect minor and trace elements such as lithium, strontium, rubidium, and barium. Their abundances can provide some insights about Mars' magmatic history and sedimentary processes. We focus on developing new quantitative models for these elements by using a new laboratory database (more than 400 samples) that displays diverse compositions that are more relevant for Gale crater than the previous ChemCam database. These models are based on univariate calibration curves. For each element, the best model is selected depending on the results obtained by using the ChemCam calibration targets onboard Curiosity. New quantifications of Li, Sr, Rb, and Ba in Gale samples have been obtained for the first 1000 Martian days. Comparing these data in alkaline and magnesian rocks with the felsic and mafic clasts from the Martian meteorite NWA7533from approximately the same geologic periodwe observe a similar behavior: Sr, Rb, and Ba are more concentrated in soluble- and incompatible-element-rich mineral phases (Si, Al, and alkali-rich). Correlations between these trace elements and potassium in materials analyzed by ChemCam reveal a strong affinity with K-bearing phases such as feldspars, K-phyllosilicates, and potentially micas in igneous and sedimentary rocks. However, lithium is found in comparable abundances in alkali-rich and magnesium-rich Gale rocks. This very soluble element can be associated with both alkali and Mg-Fe phases such as pyroxene and feldspar. These observations of Li, Sr, Rb, and Ba mineralogical associations highlight their substitution with potassium and their incompatibility in magmatic melts.